레이블이 kernel인 게시물을 표시합니다. 모든 게시물 표시
레이블이 kernel인 게시물을 표시합니다. 모든 게시물 표시

2014년 8월 7일 목요일

맥북에어에 우분투 14.04 + linux 3.16 설치

2013년 11인치 맥북에어를 사용 중이다. osx 적응에 실패, 우분투와 듀얼 부팅이 되도록 설치해 우분투 메인으로 사용하고 있는데 사실상 쓰지 않는 osx 파티션에 안드로이드 소스 등이 있어 수십 GiB의 용량이 놀고 있는게 영 맘에 걸려, osx 파티션을 더 줄이고 14.04도 나온지 꽤 됐겠다, 우분투를 다시 설치하기로 했다. 여러 문제가 산적해 있던 작년 이맘때와 달리 이제 설치가 매우 쉽고 간편하다. 심지어 리눅스로 도는 맥북에어가 osx 10.9보다 그래픽 성능이 좋다는 이야기도 있다.
http://www.phoronix.com/scan.php?page=article&item=ubuntu_1404_mba2013gl&num=1

지금 내가 사용하는 맥북에어는 2013년 11인치 모델(6,1)이다.



우분투 설치

설치는 그야말로 쉽다.
다음 링크의 기존 설치법에서 우분투 13.04 대신 14.04 버전으로 1 부터 5 까지 따라하면 된다.
http://dry-kiss.blogspot.kr/search/label/%EB%A7%A5%EB%B6%81%EC%97%90%EC%96%B4%202013%EB%85%84%20%EB%AA%A8%EB%8D%B8
우분투 14.04는 이제 2013년형 맥북에어를 거의 완벽하게 지원한다.
기존의 키보드 / 터치패드 / 사운드 등의 문제는 모두 해결되어 있다.
(커널 문제였고 우분투 14.04가 비교적 최신인 3.13 리눅스를 사용하니 당연하다면 당연한 이야기)
유일한 문제는 와이파이와 스크린 밝기 조절.

  1. 설치 후 와이파이가 인식되지 않고, 
  2. 처음엔 괜찮은데 뚜껑을 닫았다 여는 등의 동작에 의해 화면이 한번 껐다 켜진 후에는 화면 밝기가 아주 밝음과 아주 어두움 두단계로만 동작한다.

화면 밝기 문제는 그닥 중요하지 않으므로 무시하기로 하고...

와이파이 인식 문제 해결

일단 인터넷이 연결 안된채로 우분투 14.04를 설치하고,
부팅한 후 bcmwl-kernel-source 와 dkms 패키지를 deb로 받아 설치, 재부팅 하면 와이파이 문제는 해결된다.

커널 재빌드, 설치 문제 해결

한김에 간만에 최신 릴리즈인 3.16버전으로 커널도 재빌드, 설치했다.
커널 빌드 / 설치는 다음 글을 참고하시길.
http://dry-kiss.blogspot.kr/2014/01/debian-deb.html

재설치, 재부팅 후에는 bcmwl-kernel-source를 다시 설치해줘야 하는데,
3.15 이후 버전부터 빌드가 안되는 문제가 있었다고 한다.

다행히도 우분투 14.10(코드명 utop)을 위한 버전에서 문제가 해결되었다고 하니,
해당 버전을 받아서 설치, 재부팅 하면 와이파이가 다시 깔끔하게 된다.
다음 링크에서 받을 수 있다(dependancy의 dkms도 설치하는 걸 잊지 말자).
https://launchpad.net/ubuntu/utopic/amd64/bcmwl-kernel-source/6.30.223.248+bdcom-0ubuntu1

세줄 요약

osx으로 부팅, disk manager에서 우분투 설치할 파티션을 만들어주고,
우분투 14.04를 설치 후,
dkms와 bcmwl을 dpkg로 받은 후 재부팅 한다.
끝.

본문에서 언급한 패키지들 deb 다운로드 가능한 링크들

다음 링크들에 들어가 Downloadable Files 항목의 deb 파일들을 받고,
sudo dpkg -i <해당 deb 파일들의 경로>를 입력하시면 됩니다.

e.g., $ sudo dpkg -i bcmwl.deb dkms.deb

bcmwl 다운로드 링크
https://launchpad.net/ubuntu/utopic/amd64/bcmwl-kernel-source/6.30.223.248+bdcom-0ubuntu1
dkms 다운로드 링크
https://launchpad.net/ubuntu/utopic/amd64/dkms/2.2.0.3-1.1ubuntu5

2014년 1월 28일 화요일

How to upload a kernel module on Android emulator


Because Android system use linux as it's kernel, you can run your code in kernel mode by make and load a kernel module on Android.

This post simply explain how to build and load a kernel module on Android emulator.

Name of virtual device for default Android emulator is goldfish. So, in this post, I will call the kernel for Android emulator as goldfish kernel.

0. Environment
Development device / software version I used for this post is:

  • ubuntu 12.04 desktop 64bit
  • git 1.7.9.5
  • AOSP master branch synced someday between 4.2.1_r1 and 4.2.2


1. Build & Use goldfish kernel
goldfish kernel doesn't support module in default. So, you should modify the setting to support module, build again with the setting, and use the rebuilt kernel.

1.1. Get kernel source code for Android emulator
$ git clone https://android.googlesource.com/kernel/goldfish
$ cd goldfish
$ git checkout android-goldfish-2.6.29
(You can pick which branch to checkout as you want. You can see which branch is available using $ git branch -r command)

1.2. Get prebuilt project
For cross-compile, you should get AOSP's prebuilt project.
$ git clone https://android.googlesource.com/platform/prebuilt

1.3. kernel build configuration setting
You can set linux kernel build setting as you want. The setting information is saved as .config file in source code directory. But, the source code you got in above step have no .config file.
Make default goldfish kernel build configuration file with the command below:
$ make goldfish_defconfig

Now, you can see .config file. Or, you can get the configuration of already running emulator with command below.
$ adb pull /proc/config.gz
$ gunzip config.gz
$ mv config .config

1.4. Modify configuration to support module
Open .config file you generated and add next lines:
CONFIG_MODULES=y
CONFIG_MODULES_FORCE_LOAD=y
CONFIG_MODULES_UNLOAD=y
CONFIG_MODULES_FORCE_UNLOAD=y

If you don't set CONFIG_MODULE_UNLOAD, you can't unload moudle after loading. Be careful.

1.5. Build goldfish kernel
You can just follow s.android.com's same contents. In summary,
$ ARCH=arm CROSS_COMPILE=<path to prebuilt we downloaded above>/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- make -j2

The <path to prebuild we downloaded above> should be alternated with the path to prebuild you got from 1.2 section.
After build process, You can see the kernel image, zImage file.

1.6. Use the built kernel with emulator
You can specify which kernel the emulator will use with next command:
$ emulator -kernel <path of kernel image>
-show-kernel and -verbose option may be helpful in some way.

2. Build Android kernel module
Now, let's code and build kernel module for Android.
2.1. Source code for kernel module
Make simple file like below in name android_module.c

I will not explain about how the code works precisely in this post because it's not this post's object.
Simply, the source code will print "Hello android kernel..." when loaded on, "Goodbye android kernel..." message when it unloaded from kernel on kernel log.
You may change the content of source code as you want.

2.2. Write Makefile for the kernel module build process
Write Makefile with content below:
-C option at 4, 7line should point the path to kernel source code.


2.3. Build kernel module
Just set ARCH, CROSS_COMPILE environmental variable and do make. It's essentially same with kernel compile command.
$ ARCH=arm CROSS_COMPILE=<path to prebuilt we downloaded above>/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- make

If build success, you can see android_module.ko file generated.

3. Load kernel module
$ adb push android_module.ko /data/
$ adb shell
(Now, you are on Android's shell)
# insmod /data/android_module.ko

You can see the message Hello android kernel... on kernel log by using command like dmesg.

4. Unload kernel module
$ adb shell
# rmmod android_module

You can see the message Goodbye android kernel... on kernel log by using command like dmesg, too.


* You may encounter vermagic problem during module loading on some case.
In the case, article below may be helpful.
http://dry-kiss.blogspot.kr/2013/07/android-linux-module-vermagic.html


References:
http://linuxclues.blogspot.kr/2010/05/build-compile-linux-kernel-android.html
http://stackoverflow.com/questions/6282669/how-do-you-create-a-loadable-kernel-module-for-android
http://s.android.com/

How to build / install linux kernel on Debian based distributions(e.g., Ubuntu) in deb format

On Debian based distribution system like Ubuntu, you can build linux kernel in deb format. It would be easier to install / redistribute the kernel.

Install Required Package

$ sudo apt-get install kernel-package

Get Linux Kernel Source Code

$ wget https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.13.tar.xz
$ tar -xJf linux-3.13.tar.xz

Set Build Configuration

$ cp /boot/config-blahblah ./.config
$ make oldconfig

Build in deb Format

$ fakeroot make-kpkg --initrd -j 3 --revision 3.13.sjpark kernel-image

Install The Kernel

$ sudo dpkg -i ../linux-image-3.13.0+_3.13.sjpark_amd64.deb
$ sudo shutdown -r now
$ uname -r

2014년 1월 26일 일요일

Debian 계열(우분투 등)에서 deb로 커널 빌드

우분투 등의 debian 계열 배포본에서는 커널도 deb로 빌드, 간편하게 설치 / 재배포 할 수 있다.

필요 패키지 설치

$ sudo apt-get install kernel-package

커널 소스코드 다운로드

$ wget https://www.kernel.org/pub/linux/kernel/v3.x/linux-3.13.tar.xz
$ tar -xJf linux-3.13.tar.xz

빌드 configuration 설정

$ cp /boot/config-blahblah ./.config
$ make oldconfig

deb로 빌드

$ fakeroot make-kpkg --initrd -j 3 --revision 3.13.sjpark kernel-image

설치

$ sudo dpkg -i ../linux-image-3.13.0+_3.13.sjpark_amd64.deb
$ sudo shutdown -r now
$ uname -r

2013년 10월 31일 목요일

Install Ubuntu 13.04 + linux 3.11 and dual-boot with OSX on Macbook Air, 2013

Macbook Air(MBA) is one of greatest machine for hackers. I bought MBA 2010 when 11" model released and used to hack with it.

One day, I attended linux forum and requested torvalds's signature on my MBA. He refused to have a signature on MBA, but I persuaded him with my promise to install linux on my MBA. After the event, I got torvalds's signature on my MBA and installed Ubuntu 12.04 on it. And, it was really great. MBA's mobility and linux. It's really cool hacking environment.

Recently, because MBA 2010 was too old, I bought MBA 2013 11" model and installed Ubuntu 13.04. Because Ubuntu 13.04 didn't support MBA well, I also build and installed linux 3.11 official version with some patch on it. Now, I'm enjoying my hacking life.

Because the installation was not so easy, I want to record / share my experience here.
Because the time I installed Ubuntu was about 2 months ago, some parts may not be up to date. Just hope it can be a little help to somebody :)


0. Install Environment
My MBA is 11" model published from 2013(6,1). I also upgraded it's cpu, RAM, SSD.

1. Download Ubuntu Image and Burn Install CD
Ubuntu distribute installation CD image for Mac in seperate way. Go to the link below and download 13.04 for mac image(ubuntu-13.04-desktop-amd64+mac.iso) and burn CD using it.
http://releases.ubuntu.com/raring/

I think live USB will be Ok, too. But, in my case, because my USB broken, I did with CD using USB CD driver.

2. SSD Partition
Make partition on SSD for Ubuntu installation. Open disk utility from Mac OSX(If hard to find, use spotlight).
Select SSD, enter to Partition tab, reduce partition size for Macintosh HD partition as you want to.
If my explanation is too concise, see the link below:
http://osxdaily.com/2009/11/20/resize-partitions-in-mac-os-x-with-disk-utility/

3. Boot to Ubuntu Install Image
Connect Live CD or Live USB you made from step 1, restart MBA. Before MBA powered on, press Option(alt) key. You should press it as soon as you pressed power button to turn on MBA. Then, booting partition selection screen like below photo will be displayed.

The USB displayed as Windows. Looks like OSX think it's just Windows if user trying to boot from other media such as CD or USB. It's annoying but, just select it. Then, MBA boot to Ubuntu in Live CD or Live USB.

4. rEFIt Install
Pressing option key every time can be annoying. The program rEFIt can help it. rEFIt is boot option selection / managing program. You can download from the link below:
http://refit.sourceforge.net/#download
Just execute downloaded rEFIt and execute install file. Then rEFIt be installed. Now, when you restart MBA, it doesn't boot to OSX automatically, rather ask you which partition you want to boot.

Actually, the developer of rEFIt doesn't support it any more. He is now developing same purpose program with new name rEFInd. It'd rather to use it. I just used rEFIt because I didn't know rEFInd at that time.


5. Ubuntu Install
Ubuntu installation is very easy. Just install Ubuntu as usually you did on other computer. It will ask you whether want to remove OSX and install Ubuntu on entire SSD. If you want dual-booting with Ubuntu and OSX, you should not remove OSX. Just install Ubuntu beside of OSX.

After Ubuntu installation completed, you can see screen below after reboot.

After select tux(the cute penguin) from this screen, grub bootloader comes. Select Ubuntu from grub bootloader. Now, it should boot to Ubuntu... But, not... It doesn't boot and screen stuck. We will solve this problem in next step.

6. Add nosmp on linux parameter
You can adjust linux boot parameter from grub by pressing key 'e'. You can boot successfully by adding nosmp on parameter.

There would be exist the line start with next content in second line from end of screen.
linux        /boot/vmlinuz-3.8.0 root=UUID=

Just enter ' nosmp'(without quotation mark, with one whitespace) on last of the line and press f10 key. Now, it will boot to Ubuntu.

7. Add nosmp permanently
Now we succeed to boot to Ubuntu. But, type nosmp every time boot to Ubuntu from grub may be very annoying and uncomfortable. You can add nosmp to boot parameter permanently.
Open /etc/default/grub file and find the line start with GRUB_CMDLINE_LINUX_DEFAULT=".Type nosmp inside quotation mark. It may need super user permission to edit the file.
After that, save and close file, and update grub config using the command below:
$ sudo update-grub

8. Let WiFi Work
Now, we can boot, but problem still exist. First, WiFi. It's because Ubuntu 13.04 have no device driver for MBA's WiFi. Download deb file from the link below:
http://launchpadlibrarian.net/138967184/dkms_2.2.0.3-1.1ubuntu3_all.deb
Install the deb file using the command below and reboot. Now, WiFi will work.
$ sudo dpkg -i path/to/downloaded/deb_file

9. Change To EFI Mode for Whole Cores
nosmp parameter from step above means we will use only one core in MBA. It was just a work-around for boot because MBA doesn't support bios way booting properly. It's shameful to use only one core in Multi-core era. You can use whole cores if you boot linux with EFI mode.See next link and change Ubuntu to EFI mode:
https://help.ubuntu.com/community/UEFI#Converting_Ubuntu_into_EFI_mode

The link's content says, in concisely, just install a program named boot-repair using next command,
sudo add-apt-repository ppa:yannubuntu/boot-repair && sudo apt-get update
sudo apt-get install -y boot-repair && (boot-repair &)

And change Ubuntu to EFI mode using the program.

After changed to EFI mode, remove nosmp from /etc/default/grub file, and sudo update-grub to make it effect.

Now, restart MBA. You should able to see lots of boot options like below photo.
Boot to Ubuntu in EFI mode.

Now, you can use whole cores in MBA.

Also, you may see lots of error message while booting. If it's too annoying, Open /etc/default/grub again and insert libata.force=noncq as we did with nosmp. Also, never forget to sudo update-grub.

10. Install linux 3.11
Problem still exist. fn key doesn't works, track pad works as just a mouse, not track pad(can't scroll using two fingers), speaker doesn't works. But, first, let's go to kernel 3.11 version.

Download 3.11.0 linux source code from kernel.org or git repository and build / install the kernel using Ubuntu 13.04's config file as usually do.
Kernel build / installation may be out of focus of this article. See other articles about kernel build / install from Ubuntu(e.g., http://dry-kiss.blogspot.kr/2014/01/how-to-build-install-linux-kernel-on.html).

11. Apply patches for Keyboard / Track pad / Speaker
Keyboard / Track pad / Speaker still not works although you installed 3.11.0 kernel. But, there exist patches for those problems. Latest kernel maybe already merged those patches. But, because this is just my experience sharing, I will say about that.

Download links below and save each of them as file. The link is just a text file. You can just open the link in browser and copy-and-taste the contents, save as a text file.
http://www.miek.nl/downloads/2013/macbookair-3.11.patch
https://bugzilla.kernel.org/attachment.cgi?id=107811

Go back to the kernel source you built and use command below to apply each patches:
$ patch -p1 < path/to/downloaded/patch

Now, build and install the patch applied kernel source again, boot to the kernel.
Now, Keyboard, Trackpad, Speaker problems all solved and works properly.

Wish your Happy Hacking! :D



Remaining Problem
Still one problem exist. Monitor brightness adjust button works well after MBA boot to linux. But, once it goes to sleep and comes back, monitor brightness become only brightest state or darkest state.

Referenced Web Pages



2013년 7월 4일 목요일

android linux module 설치 시 vermagic 문제 해결

android에 kernel module 올리기(http://dry-kiss.blogspot.kr/search?updated-max=2013-07-04T11:23:00%2B09:00&max-results=1) 에 이어 작성한 글인데 올리지 않고 있다가 이제서야 포스팅.

android용 linux module 설치 시, module의 vermagic 이 맞지 않아 설치가 안되는 경우가 있다.

예를 들면 다음과 같은 메세지가 커널 메세지에 나오고, insmod에 실패한다.

version magic '2.6.29-12345 mod_unload ARMv7' should be '2.6.29-13579 mod_unload ARMv7'

이 경우, 커널 소스의 Makefile 의 최상단에 있는 EXTRAVERSION을 수정함으로써 vermagic의 리눅스 버전 다음 문자열을 바꿀 수 있다.

하지만, 이렇게 변경한 내용을 commit 하지 않으면 다음과 같이 기존 버전넘버와 -dirty 라는 이상한 문자가 붙게 되어 여전히 insmod 에 실패한다.
2.6.29abcd-ge3d684d-dirty mod_unload ARMv7

이는 scripts/setlocalversion 파일에서 git commit 되지 않은 변경사항이 있으면 자동으로 넣어주는 내용이다.

따라서, 해당 파일에서 version magic을 수정하는 부분을 주석 처리하거나, EXTRAVERSION을 변경한 내용을 커밋해 주면 된다.



http://forum.xda-developers.com/showthread.php?t=1236576
http://www.tldp.org/LDP/lkmpg/2.6/html/x380.html

2013년 3월 11일 월요일

android emulator에 kernel module 올리기


안드로이드는 커널로 리눅스를 사용하므로, 리눅스에서와 같이 커널 모듈을 만들어 올림으로써 커널 레벨로의 접근이 가능하다.

안드로이드 에뮬레이터에 커널 모듈을 만들어 올리는 간단한 방법을 기록해 둔다.

안드로이드용 에뮬레이터를 위한 가상 하드웨어의 이름은 goldfish다. 따라서, 이 글에서는 앞으로 안드로이드용 에뮬레이터의 커널을 goldfish 커널이라 부른다.

0. 환경
사용된 기기 / 소프트웨어 버전은 다음과 같다.
ubuntu 12.04 desktop 64bit
git 1.7.9.5

사용된 에뮬레이터의 안드로이드 버전:
4.2.1_r1과 4.2.2 사이 언젠가 sync 해둔 AOSP master branch.

1. goldfish 커널 빌드 & 사용
goldfish 커널은 기본적으로 모듈을 지원하지 않는다.
따라서 커널 소스코드를 받아 모듈을 지원하도록 설정을 수정, 빌드해 올리고 여기에 모듈을 올린다.

1.1. 안드로이드 에뮬레이터 커널 소스 받기
$ git clone https://android.googlesource.com/kernel/goldfish
$ git checkout android-goldfish-2.6.29
(checkout 하는 브랜치는 적당히. $ git branch -r 명령으로 사용 가능한 브랜치를 볼 수 있다)

1.2. prebuilt 소스 받기
크로스 컴파일을 위해 prebuilt 를 받아야 한다.
$ git clone https://android.googlesource.com/platform/prebuilt

1.3. kernel build configuration 설정
리눅스 커널은 빌드 설정을 다양하게 할 수 있으며, 이 정보는 소스코드 디렉토리의 .config 파일에 저장된다. 하지만, 앞서 받아온 소스파일에는 .config가 없다.
아래의 명령으로 goldfish를 위한 기본 설정을 만든다.
$ make goldfish_defconfig

이제 .config 파일이 만들어졌을 것이다.
또는, 다음의 명령으로 이미 돌고 있는 에뮬레이터의 설정을 가져올 수도 있다.

$ adb pull /proc/config.gz
$ gunzip config.gz
$ mv config .config

1.4. MODULE을 지원하는 방식으로 빌드되도록 설정
.config 파일을 열고 다음의 내용을 추가한다.
CONFIG_MODULES=y
CONFIG_MODULES_FORCE_LOAD=y
CONFIG_MODULES_UNLOAD=y
CONFIG_MODULES_FORCE_UNLOAD=y

CONFIG_MODULE_UNLOAD를 설정하지 않으면 모듈을 적재 후 내릴 수가 없다. 유의하자.

1.5. 안드로이드 에뮬레이터 커널 빌드
이건 그냥 s.android.com을 따라하면 되는데... 요약하자면,
$ ARCH=arm CROSS_COMPILE=<path to prebuilt we downloaded above>/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- make -j2
ARCH, CROSS_COMPILE은 따로 export ARCH=arm 과 같은 식으로 하고 마지막에 make만 하는 것도 당연히 가능...
CROSS_COMPILE 에 주는 prebuilt 위치는 앞서 1.2에서 받은 prebuilt임.

빌드가 끝나면 zImage로 커널 이미지가 나옴.

1.6. 에뮬레이터에서 새로 빌드한 커널을 사용
다음의 커맨드로 에뮬레이터가 사용할 커널을 지정 가능.
$ emulator -kernel <path of kernel image>
-show-kernel 과 -verbose 옵션을 추가로 주면 여러모로 편리하다.

2. 안드로이드용 커널 모듈 빌드
이제 안드로이드용 커널 모듈을 만들어보자.
2.1. 커널 모듈 소스코드
다음과 같이 android_module.c 파일을 생성


구체적인 linux kernel module 의 동작 원리는 이 글의 주제가 아니므로 스킵...
위 소스코드는 커널에 적재될 때 "Hello android kernel..." 메세지를, 커널에서 삭제될 때 "Goodbye android kernel..." 라는 메세지를 커널 로그 상에 뱉을 것이다.
실제 동작 코드는 각자의 목적에 맞게 바꾸면 되겠다.


2.2. 커널 모듈 빌드를 위한 Makefile 작성
다음과 같은 내용으로 Makefile을 생성.
4, 7라인의 -C 옵션의 값은 커널 소스가 있는 경로를 나타내야 한다.


2.3. 커널 모듈 빌드
다음과 같이 ARCH, CROSS_COMPILE 환경 변수 설정 후 make 하면 간단하게 끝.
커널 컴파일 할 때와 거의 같다.
$ ARCH=arm CROSS_COMPILE=<path to prebuilt we downloaded above>/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi- make

같은 경로에 android_module.ko가 만들어질 것이다.

3. 커널 모듈 로드
$ adb push android_module.ko /data/
$ adb shell
(이제 android의 shell 위임)
# insmod /data/android_module.ko

dmesg 등의 커맨드로 커널 로그를 확인해 보면 Hello android kernel... 메세지가 보일 것이다.

4. 커널 모듈 언로드
$ adb shell
# rmmod android_module
역시 dmesg 등의 커맨드로 커널 로그를 확인해 보면 Goodbye android kernel... 메세지가 보일 것이다.


* 이 과정대로만 따라할 경우 vermagic에 의해 module load에서 문제를 겪는 경우가 생길 수 있다.
이 경우는 다음 글을 참고하면 된다.
http://dry-kiss.blogspot.kr/2013/07/android-linux-module-vermagic.html


참고 자료:
http://linuxclues.blogspot.kr/2010/05/build-compile-linux-kernel-android.html
http://stackoverflow.com/questions/6282669/how-do-you-create-a-loadable-kernel-module-for-android
http://s.android.com/

2012년 5월 4일 금요일

Android 전체 소스코드를 웹에서 보는 방법.

Gitweb을 설정하면 git로 관리되는 여러 repository의 소스코드와 그 이력을 웹에서 볼 수 있습니다.

안드로이드는 kernel.org 에서 관리될 때, Gitweb을 제공했고, 회사 내에서 git 쓰기 어려운 상황일 때 최신 소스 흐름을 보기 위해 꽤 유용하게 사용했는데, kernel.org 해킹 이후로는 더이상 제공하지 않았죠.

이걸 codeaurora에서 설정, 서비스를 제공하고 있었군요.